How Zero-Export Solar Works: Meters, Inverter Settings and Approvals

Zero-export solar is a solar system set up so that none of the power it makes ever flows back to the grid. The panels first cover your home’s own use, and if production exceeds what the house needs, the system holds back instead of exporting. It’s also called non-export, and in California it’s a recognised way to connect. It’s simpler than it sounds, but it only makes sense in the right home, and it still needs your utility’s approval.

This guide explains how zero-export solar works, what the equipment does, how the approval process works in California and what to ask your installer. If you want to know whether a non-export design suits your situation, start with Non-Export Solar Systems in California: What They Are and When They Make Sense, then come back here for the technical side.

How zero-export solar works

Three things work together, and if any one is missing, the system can’t be zero-export:

Part What it does
A meter or current sensor Measures how much power your home is using and how much is flowing to or from the grid
A control system in the inverter (or a separate controller) Reads that measurement and lowers the solar output so that nothing is exported
Settings and approvals The export limit is set to zero, and the utility approves the design

In practice it works like a thermostat. If the house uses 3 kW and the panels could produce 5 kW, the controller holds the output near 3 kW. If a cloud passes and the panels fall to 2 kW, the grid supplies the rest, as it would without solar. The key point is that the response has to be quick enough to avoid sending power out, which is why approved equipment matters.

What California requires

“Non-export” doesn’t mean “no paperwork”. You still have to tell your utility and get approval to connect. As an example, PG&E’s form for Rule 21 non-export systems says the following:

  • A Power Control System (PCS) must be used to prevent export, it must be UL certified and set to non-export mode.
  • The control system must respond in under 2 seconds.
  • The inverter must be on the utility’s approved list.
  • For the simplified “notification-only” route, the system must be 30 kVA or smaller, it must not increase the customer’s peak load and it must connect to a standard 120/240 V residential meter. There’s also a limit on how many such projects can be on the same circuit.
  • You’ll need a single-line drawing, signed statements from the installer and the customer, and proof that the local authority has passed the final electrical inspection.
  • If the system will have a battery that can’t charge from the grid, the form asks for a mechanism that prevents grid charging.

That’s one utility’s form, and SCE and SDG&E have their own, so check the current rules for yours. If a system fails the simplified route, the installer may need to file a standard Rule 21 application. For how this fits with older NEM contracts, see Does Adding a Battery Affect Your NEM 2.0 Status in California? and NEM 2.0 vs NEM 3.0: Key Differences.

From the field: zero-export systems I worked on

I should say clearly that my experience with these systems comes from Spain, not California, and the rules and paperwork are different. But the way the equipment works is the same idea.

On the zero-export systems I worked on, we used a meter to measure what the home was consuming and settings in the inverter to cut the output when the house wasn’t using everything. The hardest part was usually the paperwork, not the installation. And I’d recommend this kind of system mainly to households that do most of their demanding activities during the day, because they use most of their solar power as it’s made and lose little by not exporting.

How Spain handles it, for comparison

It helps to see how another system treats the same idea. A regional manual from Andalusia, in southern Spain, describes the “no surplus” category like this: the installation must have an anti-spill mechanism that prevents any power from reaching the grid at any moment, and in that case the owner doesn’t need an access and connection contract, as an installation that sells surplus does. The paperwork depends on size. Up to 10 kW it’s a technical design memo, an installation certificate and a communication to the distributor, and above that a signed project and a works-direction certificate are required. Rules vary by region and change over time, so this is only to show how the same concept can be regulated differently. It isn’t a guide to Spanish law.

Is zero-export solar worth it?

It depends on how you use power and what your alternative is. Zero-export tends to work best when:

  • you use most of your electricity during the day, so little solar is wasted;
  • you’re adding capacity to an older system and want to avoid changing its contract (see the NEM guides above);
  • or a battery is part of the plan and backup matters more than export income.

It’s a weaker choice if you’re out all day and use most power in the evening, because your panels will often be held back with nowhere to send the excess. You can see how California’s current rules compare in California NEM 3.0 Explained and Solar Panels in California: Complete Guide After NEM 3.0.

Questions to ask your installer

  1. Which device limits the export (inverter function, separate controller, or both), and is it on the utility’s approved list?
  2. Where will the meter or sensor be installed, and what happens if it fails?
  3. How much production do you expect to lose to the export limit in a typical year?
  4. Which approval route will you use, and who files the paperwork?
  5. If I add a battery later, what changes?

For how to judge the answers, read our guides on choosing an inverter and choosing an installer.

Frequently asked questions

What is zero-export solar?

It’s a solar system designed so that no power flows to the grid. A meter and a control system keep production at or below what your home is using at that moment.

Do I still need utility approval for a zero-export system?

Yes. In California, non-export systems still go through Rule 21, although some small systems may qualify for a simplified notification-only route. Your installer should handle the filing.

How does a zero-export system stop power going to the grid?

A meter or sensor measures what the home is using, and the inverter or a separate controller reduces solar output so that the surplus is never sent out. Utilities typically require certified equipment with a fast response.

Will I lose solar production with a zero-export system?

Sometimes. When the panels could make more than the home needs and there’s no battery, the system holds output back. How much you lose depends on your daytime consumption.

Is zero-export solar the same as non-export solar?

Yes. Both terms describe a system that doesn’t send power to the grid. California’s rules use “non-export”.

Sources

This guide is general information, not engineering or legal advice. Rules differ by utility and change over time, so confirm the current requirements with your utility and a licensed installer.

Scroll to Top